nanovna saver on saa-2N

Ted Chesley Всі повідомлення цього користувача #17661 Re-calibrating my H4 and my SAA-2N with Nano-saver and VNA-QT (VNA-QT on the SAA-2N only), , I find an issue with using the nanoVNA-saver with the SAA-2N that is dogging me. The saver works fine with the H4, but when connecting to the SAA-2N, on initial connection via USB the frequency range loads as 200-300MHz. I change it to the instrument width (10kh to 3000Mhz, it will not sweep, returns: " ERROR during sweep...stopped....argument out of range". Experimenting with frequencies, I find that I can sweep and calibrate in a range of 10mhz to 1000mhz, everything works fine, but if I either lower or raise the frequency outside that range, I get the same out of range error. Any suggestions would be greatly appreciated.
Martin V Всі повідомлення цього користувача #17984 I have the same issue. VNA 2_2 Version: git-20200617-1a9a11d Build Time: Jun 19 2020
Ted Chesley Всі повідомлення цього користувача #17990 Martin, I upgraded my SAA-2N FW to ver 20200926, works fine on instrument, however I have the same issue with NanoVNA-Saver, as well as some other anomalies (program sweep runs on 1 step but hangs on 2 steps). NanoVNA-QT works OK except that low freq stimulus won't calibrate below 100Khz, but is fine to 3000Mhz (101 steps). I haven't seen but one other post reporting the same issue with Saver and the SAA-2N.. -----------------------------------------From: "Martin V via groups.io" To: nanovna-users@groups.io Cc: Sent: Wednesday October 7 2020 10:31:26AM Subject: Re: [nanovna-users] nanovna saver on saa-2N I have the same issue. VNA 2_2 Version: git-20200617-1a9a11d Build Time: Jun 19 2020 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#17984): Links: ------ [1] https://groups.io/mt/77047112/4866111 https://groups.io/mt/77047112/4866111 /> -=-=- Learn about the NanoVNA in the following forum areas: Documentation Update Files: </br<></a><a href= [2] https://groups.io/g/nanovna-users/wiki https://groups.io/g/nanovna-users/wiki /> -=-=- Group Owner: nanovna-users+owner@groups.io Unsubscribe: </br<></a><a href=
W0LEV Всі повідомлення цього користувача #18009 I have not yet tried mine using SAVER. However, due to different architecture and oscillator, I was/am under the impression you need an application different than that embodied in SAVER. According to my notes, that can be downloaded at: https://github.com/nanovna/NanoVNA-QT/releases Dave - WØLEV On Wed, Oct 7, 2020 at 7:20 PM Ted Chesley <tedchesley@...> wrote: Martin, I upgraded my SAA-2N FW to ver 20200926, works fine on instrument, however I have the same issue with NanoVNA-Saver, as well as some other anomalies (program sweep runs on 1 step but hangs on 2 steps). NanoVNA-QT works OK except that low freq stimulus won't calibrate below 100Khz, but is fine to 3000Mhz (101 steps). I haven't seen but one other post reporting the same issue with Saver and the SAA-2N.. -----------------------------------------From: "Martin V via groups.io" To: nanovna-users@groups.io Cc: Sent: Wednesday October 7 2020 10:31:26AM Subject: Re: [nanovna-users] nanovna saver on saa-2N I have the same issue. VNA 2_2 Version: git-20200617-1a9a11d Build Time: Jun 19 2020 -- Dave - WØLEV Just Let Darwin Work
Ted Chesley Всі повідомлення цього користувача #18010 David, you are correct, NanoVNA-QT is the application designed for the NanoVNA SAA-V2.2 (SAA-2.2, 2N etc). NanoVNA-Saver is supposed to work, but as noted by a couple of SAA-2N users, has some limitations. The Saver app, however, is more functional, at least in my view. переключити цитоване повідомлення Показати цитований текст On Oct 7, 2020, at 3:59 PM, David Eckhardt <davearea51a@...> wrote: I have not yet tried mine using SAVER. However, due to different architecture and oscillator, I was/am under the impression you need an application different than that embodied in SAVER. According to my notes, that can be downloaded at: https://github.com/nanovna/NanoVNA-QT/releases Dave - WØLEV On Wed, Oct 7, 2020 at 7:20 PM Ted Chesley <tedchesley@...> wrote: Martin, I upgraded my SAA-2N FW to ver 20200926, works fine on instrument, however I have the same issue with NanoVNA-Saver, as well as some other anomalies (program sweep runs on 1 step but hangs on 2 steps). NanoVNA-QT works OK except that low freq stimulus won't calibrate below 100Khz, but is fine to 3000Mhz (101 steps). I haven't seen but one other post reporting the same issue with Saver and the SAA-2N.. -----------------------------------------From: "Martin V via groups.io" To: nanovna-users@groups.io Cc: Sent: Wednesday October 7 2020 10:31:26AM Subject: Re: [nanovna-users] nanovna saver on saa-2N I have the same issue. VNA 2_2 Version: git-20200617-1a9a11d Build Time: Jun 19 2020 -- Dave - WØLEV Just Let Darwin Work
martin.millicovsky@uner.edu.ar Всі повідомлення цього користувача #38728 Hello, i am using the NanoVNA-H with NanoVNAsaver but i can´t get to use it with SAA-2N. What files do I have to change to detect it ?

Попередня тема Наступна тема