Thank you for the feed back, much appreciated.

I like your original version of it. Of course, YouTubers with big channels sometimes mumble about two digit peta byte drives. (14 digits.) And indeed, maybe 25,000 SDRSharp installs will fit on a 1

That should read terrabyte (dam auto correct)

I put all the different SdrSharp versions in their own subdirectories with shortcuts on the homepage to each as some old plugin's won't work with the newer versions. That way, if I need a specific

If you unzip the new version in a different temporary folder, delete the default configaration file, and then move all the remaining files to the permanent SDR# folder, all should be fine. I do this

That's a trick question. Since you can have as many SDRSharp installs as you want within the space limitations on your hard disk. I have a couple dozen versions ready to run when I want. I don't use

Hello Les, Maybe quadrature detectors can help when two NBFM stations are nearly on the same frequency. If you can provide a wideband .wav file I could make some testing to see if this idea could be

Good afternoon. I am looking forward to the production version of v1921. Question: If I install the 'release candidate' of v1921 now, will I have to reinstall SDR# from scratch when the 'production

I am also planning a self-contained dotnet 8 build for the "clinically dead" plugins, ie. ones that are no longer maintained. This build doesn't need a dotnet 8 installation.

Thanks for that David writeme.com@groups.io> wrote:

Jim, Glad to hear that the RTL_SDR is working correctly. The difference is that one uses an earlier version of .Net and the other a later version. Just means that is you don't yet have the .Net9

I have now downloaded both the 86 and 64 versions. Ran the install rtlsdr bat file and zadig, and now both working fine, including the gain slider. Don't know what I did wrong the first time. Thanks

Thank you Prog for adding client side buffering in SDR# for Spyserver connections. It has helped greatly with my earlier reported issues with non full IQ narrow band streaming. -- Graeme

These were moved to the Source panel.

Yes...they are now on the "source" panel... W1HHO

More info about this: I have noted that the buttons "Correct IQ" and "Invert Spectrum" have disappeared  from the Radio panel on all published incarnations of r1921. Regards, Ignacio

Today I can test it… Thanks for the best work in SDR features… This afternoon tests and coffee or “mate”... ________________________________ Fabián Malnero Maccari, EB1TR BSKY:

Jim, Just checked on both the x86 and the x64 (executables from 2024-12-28) versions and with both AGCs disabled the gain control works as expected. I ran the supplied install-rtlsdr.bat program, at

The drivers still work with r1920 fine. Slider works fine in it. 1920 skypoint.com@groups.io> wrote:

I have. Doesn't matter on or off, gain slider greyed out and not working at all anytime. writeme.com@groups.io> wrote: