I've never had to do it, but I remember it being discussed before. Have you tried searching this Group, or Online Help, for "DTMF"? https://groups.io/g/crestron/topic/100523284

Someone knows how to send inband DTMF during intercom with door stations? Carlos Ferrer

I also found that the VTpro play button will work for making XPanels if you start with 2.15.006. I thought the feature was broken for years, but there is an online help about it. Michael Block

Just to add my experience... I just migrating to a new PC and had this issue as well. standard CT_Neo, missing for Crestron App. I uninstalled v2.19, installed v2.15 then v2.17 directly from their

I used VISCA commands to TCP port 5500 for the IV-CAM-I20s we just installed. Most of the commands are the same as any other PTZ dating back to Sony EVIs and probably before. Never did find the

I was testing a system today with four Crestron 1 Beyond IV-CAM-I12-B cameras, and CP4n using the 1Beyond AutoTracker_IV-CAMA3 module.  It appears to control the cameras but I did notice an error log

I have about 10 or so xx52 and xx60 series panels in my house that use the advanced weather widget. Same zip code is fed to all in my program with a MSP of course. All panels have valid DNS. On any

Having issues trying to control this amp consistently over RS232. Using an iPad, Mute works almost every time, Raise works 80 %, and Lower never works. But if using Debugger, it does, but still not

Nope, set on Enable.

New system. Installed one roku last night, andthe 2nd one today.

The camera module works for all 1Beyond cameras gmail.com@groups.io> wrote:

Modules are available under the Intelligent Video category in SIMPL Windows gmail.com@groups.io> wrote:

Existing setup? I had to update the Roku device driver. That restored control on my demo system.

That seems like it was still set on limited instead of enabled

Strange. The Roku we set up last night went to 14.1. The Roku we set up this morning went to 14.0.4. There was no navigation of hard buttons on the TSR-310 on 14.1, but we could navigate the scrolling

All, Has anyone found a way to control a IV P20 cam via SIMPL? The device help shows TCP not UDP control for Visca support. Can standard Sony style Visca IP logic be used to control these

They have 14.3 out, did you try it? So what isn't working for you?

So on new project. Roku on 14.1 is enabled. But only works upon reboot of CP4 for at most 2 commands. Confirmed that IP address is correct, and Enable is chosen. Roku on 14.0 works fine. Going back to

Is this SIMPL driver available now somewhere?

You are a hero!