Hi Nizar, I think you are getting hung up on the wrong thing. Yes, without the corrections, the SWR value will be a little bit off, for instance if you use your 75ohm cable to match to a 75ohm load

Jerry, I just checked my kernel 5.10.209. Just updated within a couple days. I installed the app on 12/8/24.

The resonant frequency of an antenna and the frequency where the SWR is the minimum are different. Resonance occurs when the reactance X = 0 at the antenna feedpoint. When you measure the SWR at the

Hi Stan Thank you very much for clarification info about Nano-VNA App PC program, impedance conversion DiSlord function can be very usefull especially when using 75 Ohm coax's, indeed even my

Failed to download, or failed to install/run? (The store/download does not care about the kernel, nor does much software other than drivers). -- Sent from my Android device with K-9 Mail. Please

`That's interesting, Peter. I couldn't get it on my Samsung S23 Ultra. My kernel version is 5.15.148 from December 3rd (it just updated itself recently. I wonder if that's the problem. 73, Jerry,

Nizar, the DiSlord measure functions are only in the nanovna firmware, they do not exist in nanovna-app. Nanovna-app uses the raw data from the nanovna and does all of its own calculations. So to

Hi all Testing NanoVNA App + Windows11 with My New H4 , it seems almost working ok despite some bugs and crasching, but my main problem is : i do not found the new Dislord Coax functions, indeed i

I suspect it's a setting in the Google Play Store. I'm downloading it form the US store; perhaps the European store has a different setting. Jerry, AI0K

I have three Android phones, one with Android 14, one with 12 and a really old phone with 8. A Android Tablet running version 10. The StmDfuUsb app and the NanoVna web runs ok on all. Just for

Installed recently on android 14 from Play Store. Galaxy S22 Ultra 5G.

Loaded from the store, or an APK? The store restrictions have nothing to do with the APK, they are separate.

I'm using Android 14, I have had the App for years, and it works for me. Mike Willis VE3FE tpcsvc.com@groups.io> wrote:

Likely just a setting in the store, and nothing to do with the program compatibility whatsoever. -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

I am on 13 as well, strange. But I was sent a link to it and side loaded to my tablet and is working fine now. Greg KE4OOO tpcsvc.com@groups.io> wrote:

Working here on Android 13, so that appears to be the cutoff. -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

And I don't, also Android 14... -- Member of the toughest, meanest, deadliest, most unrelenting -- and ablest -- form of life in this section of space,  a critter that can be killed but can't be

I get the same message. Android 14.

My phone isn't all that old, maybe a year? Dunno what to tell you offhand... I've never run across that particular error condition, and I have a whole bunch of apps on there. -- Member of the

Matt. Good call! (and yes I bought two of them. ) Also handy is to find a couple of shielded longer cables ending in small alligator clips. Useful to connect to filters, etc. 73 Bill