Hi Markus -- I'm pleased to see you took this and ran with it and found success! Here is what you are going to do to get access to function and media keys. It looks like you have already found the

I was able to re-enable control through the Roku iPhone App.

Hi all, I have a strange problem with one CHV-TSTATRF not reporting to any touchscreens. It had been working fine until I had the replace the batteries. There are four TSTATS in the system and the

On Fri, Nov 29, 2024 at 12:15 PM, Michael Caldwell-Waller wrote: > > I threw the code and the instructions into a Pastebin --- https://pastebin.com/c2MPHAZ0 > -- come back and search for this later

I do have the challenge that I have a Samsung TV and a Samsung "smart" PC monitor (ViewFinity S9 5K monitor)  in the same room and for a number of IR commands they both react on the same commands. I

We have been using the Samsung art TVs

When he says leave some space, think in tens or hundreds not thousands. I had a takeover that they had decided to use thousands for source control. It was something like, Satellite started on 6001,

They do support DLST. I had a CP2E running a small lighting system that would shut off nvram every year when it returned to normal time.

Steve, thanks for letting us know about issue 1. I’m sure it saved me a couple of hours on Friday when I had my first service call for that issue.

I use the one from this site. I don’t use direct launch so I removed all that logic. The only trouble I have had with it was the latest update that shut control off. Finding the factory remote to

Before I embark on trying to do some basic controls, did the API get updated to work with the Media Player App?

Didn't want to high jack the other the Roku problems thread.  I have the latest database but not seeing anything.  Have found a couple that rolled their own.

Under "Project Format", select "Archived File" (vs) "Folder". The "Load Project As" radio buttons will no longer be greyed out.

I can confirm Steve's reporting of issue number one as I have clients calling. :-(  Some more detail: -This seems to have been enabled between Roku v14.0 and v14.1, My testing was done on an Ultra

Pretty sure Crestron processors only allow for time zone adjustment, as far as I’m aware there’s no DST offset in the web interface. I have a site that relies heavily on schedules so I’m keen to

NTP servers provide UTC. Clients need to apply their timezone and daylight-saving offset. That's a general statement - haven't looked into how Crestron handle it, but the NTP side of things should

Side question… do NTP servers adjust for daylight savings? Tim Greenbank Control Systems Engineer

It was a 2 series processor that I ended up just upgrading to a 4 series to use the internal NTP.

Are you on an older 2-series processor? All of the newer ones (3 and 4 series) don't need a module for NTP, you set the time zone/NTP in the Processor itself. I generally use a local one or googles

I was using the Crestron module "Network Time Sync v1.0" with the default servers and getting errors in text console with debugging enabled.