I'm guessing you are connecting to the Marantz and staying connected. For some reason if you are connected to the Marantz when Crestron reboots, Crestron can not reestablish the connection until the s

I have a problem with the ip control of the Marantz with any crestron processor I use. I am using the module for control via serial command via IP and every now and then (I have not been able to under

I Have a Clipsal Dali Gateway for lighting control I need any method to integrate with Crestron Any Module except that found at the App Market

I’m also struggling with this on a CP4N and it’s crashing the router

You ever find the cause of this. Having same issue.

I've been playing with the bigger brother to this unit - the KY-PZ510 using an old AV2 I have used this manual: http://pro.jvc.com/pro/attributes/ptz/manual/Standard_Command_List.pdf to control it. Ba

Hi, I have a problem with digest authentication of this camera I'm using a CP4 controller and I haven't figured out how to send this camera's API commands via CP4's TCP/IP port. Can anyone give me sug

TSR-310 v2.001.0174 (10/10/23) has some major improvements regarding WiFi & "Connecting to System" behavior in CH. Please update your remotes and refer to release notes for more information. https://w

https://github.com/MatKlucznyk/Qsys been using this for years and it’s been rock solid. From what I was told version 2,3,4 (not sure on 5) of the Q-SYS modules were all written by different people at

I've just swapped a program from 5.0 to 5.2; doing this cleaned up most of the errors i was getting, but still seeing this at startup: Error: splusmanagerapp.exe [App 1] # 2023-03-21 08:27:46 # Module

In a similar but different vein - trying to upgrade to 5.2 modules has been a complete bust. No connectivity to core at all. Does anyone have any prevailing wisdom that applies?

Never digged too deep for this bug, I just put a buffer on all inputs within this module, and enable the buffer by the initial input from the core module, error gone.

I would also recommend setting up a dedicated SSID for the TSRs at just the 2.4g freq. In larger systems with multiple APs, I would also have unique SSIDs on each AP and tie the TSRs to the closest AP

There was a TSR build posted to the CH Beta forum ~3 days ago (3/7/23) regarding some of your reported behaviors. http://crestron.domains/crestronhome/groups/crestron-home-os-3-beta/forum/topic/tsr-be

Mitch, Thanks for the input. the FW is up to date and I do check that on a regular basis. Signal strength is OK and I also performed a "Health Check" of the remote (in question) and that test indicate

Is the firmware on both the TSR-310 and CP4-R up to date? The past few TSR-310 releases specifically address some connection and favorite issues. What access points are you using and how is signal str

My system is comprised of a CP4-R and two TSR-310 remotes. I am controlling the local Family Room DTV Sat Receiver via IP. The Family Rm audio is deployed as Zone 3 on a Denon AVR-X8500 receiver and i

Just downloaded the 5.2 version, the PIN is back as a parameter and the seem to have fixed the library naming problem according to the release notes. V5.0 – Recompiled with Newtonsoft v4.0.8.0 for Cre

Those modules are not so great. I have a set of modules I wrote for qsys l. When I get home I’ll see if I can figure out how to send it your way. Cheers Natalie

I am getting the following error in the error log: 57. Error: SimplPlus[App02] # 2023-02-13 17:52:48 # Module S-2.1.2.5.2.22.2.1:S-1 : Q_SYS_Named_Control_Object_V5_0 at line 141: Unhandled Exception: