The 3- and 4- series apply DST (Summer/Winter Time) based on the selected/configured timezone. The 2-series have no intrinsic concept of time zones but can configure DST (from among ‘none’, ‘US’, ‘sou

The first two of those should be working; also time.windows.com has been an option in the past. NTP is on Port 123 and is not in any way like HTTP so if you're literally using http://worldtimeapi.org/

There are hundreds of digital signage options out there (LG, Samsung, Sharp/NEC, Philips, ...) but not sure about UK availability.... But The HD-CTL-101 (https://www.crestron.com/Products/Control-Hard

CPU2 or CPU3 card? If a CPU3 card you may be up against the idle timeout auto logout that all 3- and 4- series processors have by default. There is a command that you can used to adjust the time or di

Sorry, I initially replied on mobile and was a bit harried… For multicast you need to use the multicast group ID as the address so that the processor/OS knows it needs to send the IGMP Join message to

You would not be able to use 0.0.0.0 in this case on a properly configured network as the device needs to send a "join" message to the switch to let it know that it is interested in getting that data.

Have you confirmed the correct subnet mask and default route on the processors? If your single user VPN gets an address on the same subnet as the devices there is no routing (at least as far as the de

So two things... L2 Multicast will always go to the querier, best practice in simple configurations IME is to have the querier on the switch hosting the majority of encoders and you may need to make s

Any chance you have a jammed signal (making the output behave like a logic gate)? Get Outlook for Android

Are you doing intra-VC4 communication or VC4-to-edge communication? If intra VC4, the Interprogram Communication slot has been working really well (watch me get a call about this now...) for passing i

Is there a reason you need to use that flavor? By chance have you tried pulsing the update_request on the ethernet offline manager device extender? I’ve completely abandoned the 3-series ISC in all of

Unless someone has changed some very arcane default settings that are not exactly easy to find – I think they’re console only and even when I need them I have to Google them (and it’s been 3+ years si

I have been told by a swirl technology director when I was looking at ways to cost control a design that the IV cams will downshift to USB2 (with the corresponding loss in maximum res/frame rate capab

Note also that the DGE is compatible with a large number of 3rd party USB touchscreens if you wanted to look at it from a different direction. For example with one of my clients I’ve deployed a decent

I can’t remember for the 2220 but the 2020 was literally an COTS Sharp 20” touchscreen with a Swirl on the back (and even that wasn’t always the case) so I would think it functioning as a generic HID

The documentation in SIMPL is… NOT stellar to the point where it may have been more useful if it wasn’t there If you have access to the unit the web GUI gives enough breadcrumbs to mostly figure it ou

The real tests in any multicast deployment is not the number of outputs but rather the number of inputs (and number of switches and the handling of multicast between them) – in theory a completely unm

I agree with the premise that QSC Q-SYS or Biamp Tesira seems like a more logical choice in 2024 than Soundweb (keeping in mind also, IIRC, that the current ultimate parent only bought the conglomerat

The RMC-100-C (and non-scaling derivatives) do nothing meaningful to the video stream beyond the HDBT->HDMI conversion so the HDCP2 part doesn’t surprise me since that handshake is between the display

Sounds like an overscan issue; sounds like the switcher is presenting different EDID to the source than the TV directly is which you can usually fix either by copying the EDID from the sink (e.g. TV)