I have about 10 or so xx52 and xx60 series panels in my house that use the advanced weather widget. Same zip code is fed to all in my program with a MSP of course. All panels have valid DNS. On any gi

Do you have the iPad set to go to sleep? Did you try turning off the sleep and leave the screen on and make the customer manually turn it off when done? Yea not great for battery life but the device s

Jay have you tried a processor reboot? Any site where Alexa stops working that I have seen a processor reboot fixes it. Seems to be necessary after a long period of time like a year or more.

As for a module, I use the Roku 3 Series Release module in the files section here. It works great but occasionally throws errors as something in the Simpl# is not correct. Unfortunately I dont have th

Have definitely seen a lack of responsiveness on these 70 series panels. And over on the FB group theres complaints of it as well. It isnt all the time but enough to notice.

Was going to add as well you need to have a return at the end of the last item in the list or else it doesnt work. Have been using scheduler in every project and works fine.

I will say I started using CCDs reluctantly for the first time for this exact AVR on a current job where we have four of them. I am always keen on using 232 over IP control as it (almost) always just

Another quick way to navigate around within Simpl signal lists or on the left program view is to hold CTRL while scrolling- it scrolls at a larger interval than regular. But yea when you are in Symbol

I have seen that when I copy/paste signals and they span across a begin/end group marker. For some reason it thinks it put a signal in that area when it shouldnt have. Although Simpl has been getting

Add your S+ file into a new UMC file and connect signals to the Argument Definition-Signals on left of S+ go to left of Argument Definition, and right side to right side. Make sure the Program Header

I still use the the Crestron event scheduler module as it suite our needs. We did modify it a bit to add some signals for events so we can use them to populate a button list (visibility/number of conf

Yea next step is what Randy says. I have also seen alot recently that when you copy/paste signals that Simpl will actualy paste signal types on cues that they dont belong on (digital on an analog cue,

Wondering if the full path filename is too long? I have ran into that before.

Have quite a few QSX jobs out there and I havent heard of any issues. But then again I am also the Lutron programmer and I always turn off auto updates on the Lutron side. They seem to think things sh

If you are using contracts in your program then you need to open up your Simpl and resync the contracts- even if you do something simple as change a button label in Construct. Which I think is crazy-

2N intercoms do have an RTSP stream. I use them on my jobs to show live camera feed from an intercom. Make sure its enabled in the 2N itself, and the URL is rtsp://xxx.xxx.xxx.xxx:554/h264_stream (Ins

It should work as yes its a keypad on the RA2 side.

I have a system thats about 7-8 years old and having similar issues. Initially was (2) Mobotix and we swapped them for (2) 2N. Client says the person at one of the 2N Solo stations cant hear them at a

Yea as Lincoln said its a Sharp LLA201A (not sure if this is correct model number but close). Its identical and I know as I bought one for my house at a fraction of what the swirl 2020 version costs.

console command APPMODE DISABLE