Existing setup? I had to update the Roku device driver. That restored control on my demo system.

The link between them will only allow 1g. You can only stream 1 source/display at a time for anything on the second switch. You need a 10g link between both switches.

Just spoke with Elk last week about the new EZ panel/system. They are actively working on integration modules and they should be released right around the time the panel ships.

Modern Fans is an option. I haven’t used it with 0-10 but they have a IP control for it that includes the light and speeds.

If I remember correctly, Josh still needs internet to convert speak to text.

Levels the keypad/plate on the wall. They also also have bigger ones for multi gang plates.

There is a Crestron solution. You can use Crestron 110vlt wireless keypads connected to the 2 wire buss and 90volt power supplies (I think that’s the voltage) Just make sure you do a power calc and ar

You could try to break open a ribbon and use the 5th override/wire to ground. I’ve never tested it myself so take it for what it is, trial and error… https://www.crestron.com/getmedia/d7d0bec2-73cd-42

Pressing the setup button will let you cycle through the loads. 5th press (on a 4 load module) should give you all on.

Some probably wrote over an existing shade scene. Have you tried to relearn it?

My issues from yesterday, CP4-R running Home so 1 program.

I did a firmware update yesterday on a processor and experienced the same thing, shortly after adding a couple horizon keypads. Cp4-r IO’s are connected to simple motion sensors in closets. The io wou

I found the same issue on both my Sony TV IP driver’s (XBR models) and Apple TV Gen4 using IR. This is an issue with their App. I found the change after they recently released a forced update. What I

It works. Just went through this today. You have to hit pause first, then it will FF or RW.

Check your DNS

This would be a cool feature as a Crestron Home Extension for clients that have Tesla’s.

I have it running my Crestron Demo system and home Crestron system. My Unifi networks are very stable. I am not doing NVX, yet... My big complaint about UniFi, shit margins.

I suggest trying the null adapter. I’ve had URC, Pronto, RTI, Marantz, and Crestron RS232 to stereo cables for remotes. Not all pin out the same on 2 & 3.

It’s been a while since I’ve had to upload to one of those but a couple things to check... Make sure you’re using the correct Com Port in toolbox Try a null modem or flip the pins if you can. Some of

First you should verify what color wire is common, up, and down by just tapping them together and watching to see if the screen moves. Common goes to the bridge clip, up and down go to the correspondi