NICE! That worked. I used a gesture canvas as a way to move around a parametric EQ. The Y axis controls gain and the X axis controls frequency. I made a S+ module that builds a string that looks like:

I think you’re looking for analog logic symbol called “log with limits”. I haven’t poked at the maths for it, but frequencies are a logarithmic scale. You may have to poke at the numbers a bit to get

Hi All, I'm seeking a way to control a filter's frequency in a parametric EQ block in Biamp. I have successfully achieved control of it in a linear sense, but the problem is that the frequency range o

I think the Cresnet port -IS- available on a 3-series processor in Slave mode. Answer ID 5232 describes it, and I'm fairly certain I've done it before.

EISC for sure. I'd put only my button presses and feedback to the CP3, and do any lighting logic local to the mc3. I'm not sure you can use an eslave device's gateway, I know you can't use it as a cre

Your idea is the best, cresnet is about 38400 baus rate, super slow. You can also try the EISC but it will requiere having two running program and get things synchronized

I would make the MC3 a slave. That way all of the IOs including the EX gateway will be available in the CP3. I am embarrassed to say that I am not sure about the cresnet. I would assume that would nee

Hello, Here's my setup, I replaced a MC3 with a CP3N (RS-232 and the three IR functions have been moved over from the MC3) but I also have a Crestron CLW-DIMEX-P controlled by the built-in MC3's RFGW-

Hello again all! I figured it out, mostly by finding another thread on here: https://groups.io/g/crestron/topic/udp_socket_stumped/35800731?p= As Kool Aid-Drinker in that thread said: "Looks like the

Hello! I'm running into a problem that I'm struggling to figure out, I'm communicating between two DMPS3 systems. I wrote my own TCP client in Simpl+ that accepts a target IP, which connects to a Simp

Does anyone have an example of Home-Connect-DL door lock? I can't seem to find any info on it. Thanks

Late to this party, but did you end up getting anything written for the VC-9. We have a VC4 that we are getting ready to do, and would rather not start from scratch. It seems RS232 over IP is the way

Hey Caleb! Yeah, I think client education almost makes this a non-issue, but it's just something I've considered occasionally over the years. Thanks for sharing!

We’ve done: Power button = Off | source selects source turns room on. This is my preferred method as the operation is always the same. Power button always turns the room off, source always turns the r

Yeah, that's how we've always done it too.

Power is off, source is On or source select depending on system state

Just curious how other programmers handle the power button, or more specifically, the power button when the zone is in the off state. My company has always used the power button solely to turn a zone

As far as I know there is no separate API for the DMPS line, so you would need to write a program for the DMPS3-200-C that accepts custom commands over TCP from your QSC processor and then selects the

Hello guys. I work as a Qsys freelance programmer. I have this one project where QSC control nano is being used as a control processor and dmps3-200-c simply as a switcher with 2 HDMI inputs and 1 DM

Yes, Lincoln is correct. You want to use the "uprogcmd" symbol. Not the "console" symbol as I incorrectly stated. That's what I get by doing thing from memory rather than looking at what I actually ha