Hi, DM-XIO-DIR-160 stopped working after trying to upgrade from ver. 2.0001.0041 to 4.0.121 It said Firmware completed, pressed ok and it showed 50min remaining, after that it stopped working. When en

Awesome! You may want to add it to all the ports that are not connected to an adjacent switch (i.e. edge ports) both to prevent this and speed time to the port passing traffic when link is established

Yes, switch is stacked with stack wise cables. Your discombobulated brain was correct! Both ports had: interface GigabitEthernet1/0/1 switchport mode access no ip igmp snooping tcn flood end interface

(Coherency disclaimer: I just got back from a trip overseas and my already discombobulated self is further discombobulated because of a 5 hour weather delay) Just to confirm since sometimes the “Stack

System is a Cp4n with two stacked Cisco 9300s as the control subnet. One fiber, one copper. NVXs are all on the fiber part of the switch. NVX is completely stable except when someone plugs anything in

Hello, more and more often I come across projects using NVXs (source -> transmitter -> receiver -> projector), where I can't predict the source (might be Windows PC, Apple MAC, Playstation, BluRay etc

Hi Mark, my configuration was quite simplistic: I created a VLAN (X for reference), matching the 3rd party IT's VLAN mapping for the AV components (even though our traffic is contained within our own

Hi Steve, I indeed also quite quickly ran into the limitations of the Basic Display vs. the Advanced mode, but it was mentioned in Crestron's Configuration Guide for the SG350X's switches as well, so

I just did a deployment with that switch. It's NVX and Dante all on the same switch and is working well. Can you share exactly what you configured? Do you have a configuration of the switch you can sh

I cannot speak for the CBS350, but I have successfully used the lower cost CBS250 series with NVX. Although it was a pretty simple NVX system with all NVX on the same switch. I should note that the fi

Hi all, we initially planned on using Cisco CBS350-series switches as a switching backbone for Crestron NVX (being the "recommended follow-up" of the SG350X series for which Crestron's answer ID 10003

He won't have the same issue with a other product if the issue is availability.

What problem are you trying to solve? Besides video transport, what features do you need? If general availability is the concern I’ve had a handful of projects (some where we did the design and progra

Why do you want to replace them? If you want just the same thing from another brand, I would recommend Lightware Vinx. Else if there are technical reasons why NVX doesn't work properly, you will have

Good afternoon, What would be a good replacement for the NVXs?

Querier IP should be in the VLAN.

Hi Rob. For the querier IP, did you use an address in the same segment as the VLAN or one of the multicast type? TIA

We have had better luck acquiring the MX4250 series and pairing them with the 4300 10gig fiber switch for something this large. Just be mindful to update all the firmware when combining 4250 & 4300 in

Hm, strange - no issue with availability here in Germany. Lots of them for next day shipment… Cheers, Thorsten Von: crestron@groups.io <crestron@groups.io> Im Auftrag von caspar@... Ges

We have used multiple Extreme Networks x440 switches in large NVX deployments (60-80 endpoints). I would really love to try the new Netgear GSM4248UX switch with enough power to support all of the end