Use the Brightness command to turn the LED off. I usually don’t even mute it since I am already muting the DSP. I just send commands for changing the unmuted color from green to red or from a color to

Perhaps you are loading to internal memory, and the program is running on external. This gets me all the time.

So that is what all that garbage is. Really like this box. I just ignore the garbage. Everything you need is in the reply. Never needed anything more than a SIO to parse it. Definitely doesn't put in

I usually just mute the audio for 20-30 seconds. That way they won't be persuaded to call back immediately after getting hung up on. Thanks, Davis ________________________________ CONFIDENTIALITY NOTI

Hope you are enjoying your time in Richmond, Lincoln. One of my favorite customers as well. -Davis

I am at HI Orangeburg and will have a car. I will have room for two passengers. Davis

I have done several systems. I suggest using the SVSI conductor for controlling the displays. You can put the commands in using the web configuration on the conductor. Each command has an ID. The Cres

Use NO (Normally open) and Common wired into an I/O. When the Input closes, mute the system, and lock out any TP controls. Just as if it were a button. When it opens, unmute and remove panel lockout,

I think you probably could have changed it over in half of the time that it took me to read your rant. ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any docume

Why not just use buttons with visibility joins? Exactly the same as a legend Davis ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previo

I use a logical method for multiple displays and audio. If the currently selected source is currently routed to any one of the displays, then that becomes the audio source. So, if I have sources 1-4 o

CNPI-48 or 2 CNPI-16. Intended for custom button panels, but it is basically an i/o. Davis ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files o

I went through the same stuff as Lincoln, with the scrolling text and whatnot. If you are only doing basic stuff, a serial I/O works great. Send *STATUS ?\r Receive STATUS IDLE, or STATUS REBUSY,

2 DM32x32, 2 DGE2, 2 extron iplinks, and 22 steel case mediascape collaboration tables. No issues. Davis ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any docu

This system is the same scenario. The incoming calls were causing the serial port to be extremely chatty, with call status info. And, because they are ghost calls with no information, it made the Simp

I had ATSG come on site for this same issue. THREADSAFE CHANGE ended up being the solution, after much logging. In the same building I have a much busier system with 2 32x32's and 22 TPC/IP connection

I also have dozens of systems with DMPS and C-series codecs. No issues. I am sure that some of them are in conjunction with other chatty devices. I use a modified module, but I don't think I have had

How about an analog inc for left/right that increments by 1 and analog inc for up/down that increments by 3. Run them into a sum. Add conditional logic for a wrap around effect. Obviously there would

Found mine in the spam quarantine. Thanks to yahoo group for tipping me off. Confirmed for Dec 3. October is a busy one this year. Davis ________________________________ CONFIDENTIALITY NOTICE: This e

It wouldn't be very "protected" if you could...