The solution is to uninstall SmartGraphics 2.17, install SmartGraphics 2.15, and then reinstall SmartGraphics 2.17. It now seems to hang for about 30 seconds during the compile, but it does successful

The Biamp modules were version 1.5. Two workarounds seem to exist: rollback to the older SIMPL, or update the firmware on the processor. Either fix alone solved it. The program was from 5 years ago an

Tech support told me to roll back to SIMPL 4.11.06 because of issues I was having compiling. Apparently newer SIMPL is only meant for programming 4-series at the moment. Newer versions of SIMPL gave m

Hi Jon, Did you happen to find any information on this? I am looking to do the same thing. Thanks, Matt

1) Is it valid to just use serial buffers to route "StreamLocation_F" from transmitters to "StreamLocation" on receivers for the purposes of video routing? 2) For secondary audio, are serial buffers u

I work for a Massachusetts company that is looking to hire another Crestron programmer. The majority of the work can be done from home. I enjoy working here because they understand that work/life bala

I ended up driving an analog increment with the digitals for clockwise and counterclockwise. These digitals don't stay high for as long as they did on the older MPCs, which makes this more of a workab

The analog associated with turning the MPC3-302 knob seems to jump about 10% with each click. Is there a way to make the increments smaller? I think most clients would like finer control over their vo

The E506 unfortunately does not support network connectivity. The tech will try the PD Comms tool today if he can locate his USB to serial cable. I'm anxious to know if we should avoid the E506.

We gave up on RS232 and went to IR. The tech is someone I trust and tried two different serial cables and tried two different E506s. He only connected pins 2, 3 and 5. I'm going to call Level 2 at NEC

Hello, The manual says that the E506 uses the same serial commands as similar NEC models that I have controlled. My issue is that it echoes back commands to me whether they are good or bad, and does n

Me too. It fails to load more than a few of the most recent messages on any given topic. I agree that it might be time to finally move this group elsewhere.

"Sony BRC-300 Camera Control with Joysticks and Picture Controls v3 (cm)" from the Crestron Database works with the AVer Cam 530 for the few signals I tried: Tilt_Up, Tilt_Down, Pan_Left, Pan_Right, Z

Thanks for posting about this. I also ran into this today.

Hi Everyone, The 1.7 modules seems to work fine with the latest firmware. The issue came down to a serial cable that was slight damaged and "reliably" giving erroneous feedback. Thanks, Matt

I did try 2.2, but continued to have the same issue. It also seems problematic for them to force everyone to migrate to module 2.2 instead of making it reverse compatible, especially since 2.2 only ru

Hello, I am using the 1.7 modules to try to communicate via serial with a Tesira Forte running the latest firmware. The modules never seem happy with the responses received when requesting "get versio

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce81/sx-mx-in-room-control-guide-ce81.pdf

Thank you Kevin and Jeremy. You have potentially saved me hours of chasing this. Kevin - it would be great to get my hands of your updated modules if you get a chance. Thank you!

I am going to be integrating BSS for the first time. The processor is a 3-series and the BSS is a BLU-100. Should I use Crestron modules from the Application Market, or directly from BSS? I am having