On Thu, Jun 15, 2023 at 07:59 PM, Steve Kuehn wrote: So if a reboot does not take care of it, it is probably RMA time. I wouldn't say that at all. Worth checking REPORTCRESNET and/or NetDevTree to ens

Enable debugging on the module, and let it tell you what the error is. These modules are very sensitive so if an electrician was doing something while the module was powered up then it's probably frie

If you look at the installation guide, it says the 1-2 error code means "Communications to the corresponding dimming processor have failed. Reboot the unit or contact Crestron customer service.." So i

Hello guys, I'm currently experiencing an issue with a CLX-2DIMU8 lighting module. This module was installed Thursday of last week (with no issues) and just yesterday it started flashing a 1-2 error c

I have tried using the same phase for all channels and using two separate phases for channels 1-4 and 5-8. Neither seem to work. It's like channels 5-8 are somehow blocked/protected electrically.

Make sure they are the same phase for 1-4 and 5-8 on same 2x8 module.

So I'm having an issue with two (2) GLXX-2DIM8 units where on both of them the channels/relays 5 through 8 are not outputting 120vac when they are turned on. 1 through 4 work perfectly though (through

Add ch processor and then import signals from Simpl windows into crestron home. Nf NFH

The client has an old installation with a DIN-8SW8I module for motors control(Window blinds) and lighting witch AP3 procesor. He want to change the system to the "Crestron HOME" version. Is it possibl

Is there a HOME driver for VANTAGE? The problem is we have both HOME and SIMPL projects underway, so we need modules that can play with both. I've already asked Shelly if they plan on releasing DIMMER

WMS has a crestron home driver for most Shelly products. I believe there is a demo so you can play with it. https://chdrivers.com/collections/lighting-systems/products/crestron-home-shelly-iot-driver

We use Vantage Controls a lot, they have a variety of din mountable options and have a Crestron module available

Lutron lead times are 14-20 weeks, long but reliable NFH

I'm not sure Lutron delivery times, but that would be the best alternative imho. Cheers!

I'm only releasing a driver for Simpl. I will leave it up to someone else to write one for home. Shelly has a nicely documented API but supporting their growing product line is quite a bit of work jus

Will check them out right now thanks @jbasen. Will you be releasing a driver for HOME as well? or only SIMPL?

Shelly has a line of PRO relays that are din rail mountable and you can use the Shelly-Crestron drive I wrote that is available for download from my GitHub to integrate them into Simpl. However, Shell

With CRESTRON's impossible ETAs for their DIN RAIL lighting units, are there any 3rd party DIN RAIL lighting modules compatible with CRESTRON via SIMPL or HOME? Thanks.

You can wrap an oscillator in a standard SIMPL module and load it into D3pro as a logic module - hooking it up in D3 is a faff, but that would be how I’d do that (off the top of my head)

Greetings all. I am trying to figure out how to get a pulsing feedback from D3. Similar to when a lighting load is dimming and the led blinks. I want certain specific loads to do that whenever the loa