I see, thanks! .. and do you know by any chance if there's a firmware or a way to modify the IFBW? I was mostly interested in the Ojisan firmware because of that. On Nanorfe website they show graphs w

I think the Ojisan firmware is intended for the NanoVNA V2, not the V2 plus4. --John Gord

Hello everyone. I've just bough a NanoVNA V2 plus4 from Amazon and was interested in flashing the Ojisan firmware. After flashing via normal procedure as written in Nanorfe website, the VNA stays with

My nanoVNA is a V2Plus4. Savers sees it as NanoVNA-V2, with a FW version 1.0.2 This USED to work just fine. Windows update? nanoVNA setting? Connect to nanoVNA Setup the Sweep Parameters with a single

You most likely had a weird chip and firmware combo too. Take it as a learning experience. - know your hardware - make backups of firmware (ideally 2x & crc) - check if updates are compatible with you

that is still an older fw .. but at least you have a working unit with a working bootloader (so your pc should find it) dislord sure has a newer fw for it ... 17th (19th) of june 2020 is VERY old! (wh

20200617-1a9a11d Jun 19 2020

With DisLord's help I was able to unbrick it !!!!

GOTCHA! :-) what fw do you now have on what unit?? dg9bfc sigi Am 31.01.2023 um 02:38 schrieb Ray WW0AW via groups.io:

U N B R I C K E D !!! The problem was the STM32CubeProgrammer I got is buggy, so I switched to the older STLINK Utility and it worked like a charm. Thank you my friend.!!!

The dfu tool and STMCube are interchangeable - Cube just has a lot more features (and runs on a lot more platforms). I have had zero issues using them interchangeable on my -H4 . . .

This gave me an idea. Does the reverse apply? If the manufacturer used STMCube, could I have successfully loaded an old NanoVNA dfu with DfuSE-Demo which ran with anomalies but then when I tried to lo

This is great !!! Thank you my friend, for the files with full dump of GS-400 which is just what I needed. You're right, I destroyed the bootloader so I cannot use either NanoVNA-App or QTbut I alread

Read better.... You use STM-Cube, so you destroy bootloader (need use NanoVNA-App or QT for update in bootload mode) Upload this in 0x08000000 address as before 4-inch-GD32F303CCT6-20200619 FULL.bin

One of user made full dump for GS-400 I cut remove bootloader and data, try upload it (hold right button and power on, connect to PC, and use NanoVNA-App or QT for update) If not help you can try flas

dislord maybe can help .... (best firmware modder ever hi hi) dg9bfc sigi Am 29.01.2023 um 17:51 schrieb Ray WW0AW via groups.io:

Now I realize I should've saved the original firmware before updating but it's too late for that now,

Yes it is a GD32 - I can read it right on the chip. However ..... The STM32CubeProgrammer Target information tab says : STM32F101/F103 High Density Sevice ID 0x414 Flash size 256KB CPU Cortex-M3 Bootl

I feel your pain.. I had a similar occurrence with an alleged NanoVNA from an apparently Chinese vendor but shipped from stock in US. Although it was sold as a NanoVNA it was delivered with a NanoVNA-

is it an stm32 or a gd32??? dg9bfc sigi Am 28.01.2023 um 17:18 schrieb Ray WW0AW via groups.io: