I am unable to change the Android version. Once it is changed, the functionality remains the same as TSW. Eric Luckart via groups.io <eluckart@...> 于2024年12月8日周日 13:55写道：

The 70 series has no other issues. The model change fee for the panel is 200 dollars. A discount is available for more than 20 units. (If you are interested in cooperating, the price can be negotiated

Can you update the android version on the panels? What about the app version, like the sonos app on a x60 panel to support the s2 app?

What's the approximate cost, assuming there are no other issues with the panel? For a point of reference, what's the approximate cost to replace a screen? That seems to be very common. What are the ty

If you want them repaired, please send them to me. ckangis via groups.io <chris@...> 于2024年11月13日周三 11:35写道：

This is a rather fiddly technical problem. If you want to change them, please send them to me. ZS via groups.io <zac.sparrow@...> 于2024年11月13日周三 19:11写道：

Can you tell us how to flip TSS panel to TS/TSW? TIA

Good to know. I've had a number of TSWs from the 2019/2020 era that have needed repair, particularly ethernet issues I think...

Hello everyone, I am a hardware repair engineer. I have worked in Crestron for many years. I can repair 3 series (AV3/PRO3/CP3/MC3, etc.) and 4 series host (PRO4/AV4/CP4, etc.) systems (including host

Hello Senior's , i am facing a big problem , i have bunch of cp3 in my work place which is connected to xpanel , i try to connect the tool box and searching for devices ,connected to Cp3 i click the W

I think the Cresnet port -IS- available on a 3-series processor in Slave mode. Answer ID 5232 describes it, and I'm fairly certain I've done it before.

EISC for sure. I'd put only my button presses and feedback to the CP3, and do any lighting logic local to the mc3. I'm not sure you can use an eslave device's gateway, I know you can't use it as a cre

Your idea is the best, cresnet is about 38400 baus rate, super slow. You can also try the EISC but it will requiere having two running program and get things synchronized

I would make the MC3 a slave. That way all of the IOs including the EX gateway will be available in the CP3. I am embarrassed to say that I am not sure about the cresnet. I would assume that would nee

Hello, Here's my setup, I replaced a MC3 with a CP3N (RS-232 and the three IR functions have been moved over from the MC3) but I also have a Crestron CLW-DIMEX-P controlled by the built-in MC3's RFGW-

Hello again all! I figured it out, mostly by finding another thread on here: https://groups.io/g/crestron/topic/udp_socket_stumped/35800731?p= As Kool Aid-Drinker in that thread said: "Looks like the

Hello! I'm running into a problem that I'm struggling to figure out, I'm communicating between two DMPS3 systems. I wrote my own TCP client in Simpl+ that accepts a target IP, which connects to a Simp

Hello Lincoln, good deal, just needed this piece of info to stop the eager to dig deep, thanks alot!

If you have the .SMW file you can replace the processor and recompile for 3-series but it is not possible to use a 2-series compiled program on a 3- or 4- series processor because there are some rathe

Hello Good fellows, Is there a way to reuse a 2-series program on a 3-series controller? Is for troubleshoot purpose (running debugger), eventually I aim to rewrite the program for the old 2-series co