Hi, DM-XIO-DIR-160 stopped working after trying to upgrade from ver. 2.0001.0041 to 4.0.121 It said Firmware completed, pressed ok and it showed 50min remaining, after that it stopped working. When en

Awesome! You may want to add it to all the ports that are not connected to an adjacent switch (i.e. edge ports) both to prevent this and speed time to the port passing traffic when link is established

Hello, more and more often I come across projects using NVXs (source -> transmitter -> receiver -> projector), where I can't predict the source (might be Windows PC, Apple MAC, Playstation, BluRay etc

Hi Mark, my configuration was quite simplistic: I created a VLAN (X for reference), matching the 3rd party IT's VLAN mapping for the AV components (even though our traffic is contained within our own

He won't have the same issue with a other product if the issue is availability.

Querier IP should be in the VLAN.

We have had better luck acquiring the MX4250 series and pairing them with the 4300 10gig fiber switch for something this large. Just be mindful to update all the firmware when combining 4250 & 4300 in

Has anyone had success using the Secondary Audio mode of an NVX endpoint without streaming video as well? My scenario: NVX-350(RX) feeds a receiver. If I am watching and listening to a NVX stream and

Yes, that is an important article. When troubleshooting it's often helpful to start at the device's Answer Index. https://support.crestron.com/app/answers/detail/a_id/1001202 Please remember that OLH

NVX does not deinterlace prior to encoding. Since the NVX-363 includes a scaler, it will always deinterlace first, so no interlace output is possible. NVX D20 and D30 do not include a scaler, so if th

Anyone have any luck controlling NVX over Websockets? I can't get it to upgrade the connection. REST works properly, but can't beyond that. Further, based on the documentation from Crestron, I should

Lincoln, Much appreciation to you as that was it! We will be testing various levels to see if we can improve on that volume from the NVX encoders.

Getting to modern BIOS(UEFI) is a challenge even with directly attached keyboards. If your computer is Windows 10 based, holding the shift key while clicking on Restart button will give you the option

Sorry for the delayed response. I am not getting notifications when someone is responding. I was looking for a single switch that could do a mix of copper and fiber. Extreme has the 5520 series of swi

Should pass through EISC just like any other strings or bytes. Check with debugger and double check your join numbers and directions. Eli

Hm interesting, Was that firmware 5.1.4651 ? My issue was on 350's

Just remember that when you do a RESTORE, the units will likely require full AUTH afterwards. So if you're not already using full AUTH, be prepared... This seems to be true with all major devices now

Hi guys! I am trying to route usb following video, but I have no usb commutation... USBFollowsVideo is on, AutomaticUSB is on, UsbMode is 1 (for mouse and keyboard), UsbTransportMode is 3 on both side

Yes Nate. CEN-SWPOE-16 is just more than a hub. It has features like it can deliver POE, DHCP can be configured and VLAN can be assigned.

Interesting Comment you made here about the 9K switches. I just updated 500 NVX350's on 20 Cisco 9300's with 40G interconnects to 2 C9236 Core switches. Have an intermittent issue in 2 or 3 of the 20