What would explain why the same VTP project on two different TSW1060 panels of the same firmware (3.002.1061) works in one location and not the other? At both locations they pass TESTDNS TSW-1060>test

This sounds like it could be related to "Inhibit Ethernet Search" which is a right-click menu option when you right click on a device in the Network Device Tree view. OP

tvOS 18 - CEC control appears to be back working again. Yay OP

I'm going on hearsay here but I was told Lutron recently pushed from the cloud an update to their QSX processors. I didn't know this was a thing but apparently it is. Coincidentally, around the same t

Interesting... I had a session with Axis support's top intercom guy on Friday. We got into looking at Wireshark traces as the call was established. Wireshark has a section called Telephony and then SI

We have been going through a bit of hell with this and I'm just reaching out in case others have seen this and had a fix. This is an old Simpl system. Very simply: a call is placed from the 2N by conf

Presumably you know about https://iaqualink.zodiacpoolsystems.com/? That's where you can set up your own account and point it to multiple different systems. Because the Crestron module only has 10 sys

Who understands how the System Key works? I only ask because I've had 24 hours of license fun and a strange thing happened. On an old take-over job, I was on site making a minor programming update and

Job in the LA area: SourceFile : C:\Users\admin\Dropbox (Maxsystems)\ERO\Projects\Carolyn\Programming\Carolyn v2 ProgramFile : Carolyn v2.smw SystemName : Carolyn Programmer : David Perez Previous int

I came across the Control4 variant recently. I too was told by Axis support that you cannot reflash it to get back to the "standard" version which includes the Crestron RAVA stuff. I don't believe the

I like Lincoln's idea of just putting the PAC2 into Cresnet slave mode - I hadn't thought of that. if that works and it doesn't upset the CP4R it seems like an easy way to do it. Thx Lincoln! Op

I will be updating an ancient system with a PAC2 and CLX dimmers and CNX-BXX keypads to Crestron Home in a few weeks. There's a load of the field Cresnet wires landed right on the PAC2 on its many Pho

Just a quick question on this. I have to go to an ancient job tomorrow that has the select button problem. it is so old it has RMCLVs and two are controlling Apple TVs via IR. Wondering if anyone has

I happen to be playing with my Frame TV to check on something: If I'm in Art Mode, then a single send of an Exlinx HDMI input takes it out of Art Mode, but on my TV this is not the HDMI source. It's w

Hi Michael! We purchased Josh's module and have it working great for controlling the ICMP (had to downgrade from a 4 series to 3 series to make it work but that's OK - it's a known issue with later 4

Igor, thanks for valuable information. The embarrassing thing here is that I am replacing Control 4 with Crestron, just for this theater setup, because I can use a module for displaying and controllin

There's really scant info online. After some digging, The closest I got was these: \xfe\x00\x66\x00\x00\x66\xff put it in sleep mode \xfe\x00\x67\x00\x00\x67\xff take out of sleep mode but the protoco

This is so strange but I literally had this kind of phone call today, from a good resi client of mine who has, I think, 6 properties (3 in So. Cal, 1 in Dallas, 2 in NY). I'm in LA and have programmed

One disadvantage Tony of the V1 vs V2 is that the engraving options for the V1 are more flexible. In the new "Impress" engraving program, they just have a few fixed options for how you can lay out the

The Meanwell SP-300-24 is the power supply inside the 300W Cresnet power supply I just had to open up. That part number appears to be obselete (well, people are selling them "reconditioned" online whi