I'm curious about the application. If you are using 2n, for example, there are better ways to do it. Can you give more about what you are trying to achieve and with what hardware?

I haven't run VC-4 on virtual box for quite some time, but I have on KVM daily. I have never seen this issue. I would be highly surprised that it has to do with VB, it is more likely your vc4 install.

The ML-600 was built by URC (it is a URC remote, actually). Found this on a search for URC pinout: Pin 3 Host Transmit To Tip Pin 2 Host Receive To Middle Ring Pin 5 Host Ground To Base Ring

I don't know anything about this box specifically, but it looks like it is android based. Often, these do not have IR. Your best bet would be to use a USB FLIRC, this will receive your IR. With more r

If the unit has a USB port try plugging in a USB keyboard. If you can navigate the system, a FLIRC will work to give you IR control.

I have tested on a cp3, cp4, and VC-4, all of which have previously worked. When I load to a fresh processor, I get the message "Please contact dealer to setup custom providers on the control system."

We've been using TV presets V2 since its inception. I'm finding that when I load a program to a processor for the first time and go to the presets page, I get this message, "Please contact dealer to s

If you use an itunes account that you purchased the old mobile app, you can still get it from your purchase history. If you continue with "If it ain't broke, don't fix it" method, you can continue wit

We have a NVX system that was set up a few years ago with Araknis switches. Yeah, I know, not ideal. The system works fine on with the NVX equipment on the main switch, the secondary switch works inte

Does anyone know the command to set an input card to HDCP 1.x from the command line? I have a 32x32 and the PC onsite will not load the DM tool. Or... can I use the DM tool to connect to the input car

I've seen the same issue. I rolled back to an older version and that works.

Just wanted to throw this out there for those who use d-tools. What are you using for project management? Anything the semi integrates?

We have clients that want to "cut the cord" in commercial spaces for TV content. What I am finding, all streaming services like Netflix, Hulu, YouTube TV, etc. are licensed for personal use only. Even

make sure you are going to https and not just http. http works but exhibits the behavior that you are describing.

It's been years since I played with a 302 and voice. The TSR-310 also just provides a text string that you pipe into josh. One issue I had a while back is the timezone on the remote needs to be set. T

I have a client that wants to trigger roof heaters based on weather conditions. Basically, if it is snowing. I'm not necessarily looking for a free handout, but am curious if someone has done this and

Thanks Eric. My initial search did not return your version. Looks good, I'll give it a try.

I think that is a function of SIMPL that we can't get around. You could change the default application for .usp files. At least with that, if you double-click on the file in explorer, it will open in

In playing with it some more, you can modify the extension to compile in 4 series. Locate extension.js and edit with a text editor: C:\Users\[your username]\.vscode\extensions\mwgustin.crestron-simpl-

There is a plug-in for VS code for SIMPL+. I have not played with it much, but it seems to work. I typically have VS code open for other things anyway. It appears to only have compiling for 3 series w