I'm guessing you are connecting to the Marantz and staying connected. For some reason if you are connected to the Marantz when Crestron reboots, Crestron can not reestablish the connection until the s

You just hit the dial digits of the voip extender. If that doesn't work, you could try changing the inband protocol off the panel and try again.

That seems like it was still set on limited instead of enabled

They have 14.3 out, did you try it? So what isn't working for you?

The light bulb at the bottom to go-to the lights page. Then it just pops up at the top.

When my system disconnects, if I launch the Alexa app and select the light bulb, if not immediately then after a few moments it will say "Crestron is unlinked, do you want to relink" at the top of tha

Update. It seems that firmware 14.1.4 does not have this issue.

We have been using the Samsung art TVs

When he says leave some space, think in tens or hundreds not thousands. I had a takeover that they had decided to use thousands for source control. It was something like, Satellite started on 6001, Bl

They do support DLST. I had a CP2E running a small lighting system that would shut off nvram every year when it returned to normal time.

Steve, thanks for letting us know about issue 1. I’m sure it saved me a couple of hours on Friday when I had my first service call for that issue.

I use the one from this site. I don’t use direct launch so I removed all that logic. The only trouble I have had with it was the latest update that shut control off. Finding the factory remote to reen

Back in the days of the original app we would have an oscillator set at .5s trigger an input. This for some reason would keep the socket alive. I would if this would work for three newer app in this s

For issue 3 Maybe try blocking all multicast to the network port of the Roku's. I wonder if it will also fix the issue with 2.

Can you update the android version on the panels? What about the app version, like the sonos app on a x60 panel to support the s2 app?

Not all Radio stations are being broadcast in the same way. Might want to post the stations you would be using to have someone test on the different options

UDP is stateless, meaning they don't actually make a connection per say. One talks and just hope the others are listening. In simpl and S+ you have a single definition for UDP communications. You woul

The issue you are describing is exactly how it has always worked. When the pannel connects to the program, Simpl will refresh all join's from 1 to the last join defined join. Like this - TP connects t

My guess is you forgot to put the default gateway or have it wrong on those processors.

Mike, you can run the wifi in bridged mode. I did this for over 10 years on several MacBook's. The only system I ever had an issue with is Ruckus. By default they prevent this. A simple command on the