Cheers Lincoln, I appreciated the comprehensive answer!! Tim Greenbank Control Systems Engineer

Fantastic, thanks Josh that’s good to know. I had a feeling they did but certain “cheap and cheerful” devices shall we say seem to give the option to set the dates of DST 😅 Tim Greenbank Control Syste

Pretty sure Crestron processors only allow for time zone adjustment, as far as I’m aware there’s no DST offset in the web interface. I have a site that relies heavily on schedules so I’m keen to get t

Side question… do NTP servers adjust for daylight savings? Tim Greenbank Control Systems Engineer

Brightsign or similar would do the trick reliably but they are a hardware solution. Tim Greenbank Control Systems Engineer

Hi Jay, Did you get any tracktion here?

Hi all, Jumpng back into some custom programming for Crestron residential projects. Just wondering if anyone can reccommend a SIMPL code framework that is decent and expedite project delivery. I have

I know you’ve got the GLS-EM-MCU but I feel like a Shelly energy monitoring unit might be much easier to work with here. It looks like it has a robust api and historical data. I’m about to start playi

It does seem pretty crap, unless I'm doing it wrong it's hard to find anything useful other than auto generated text.

If you ask Cool Automation nicely they will update the CoolmasterNet and enable Bacnet for you. As far as I know the Home processors don’t suffer from the same bacnet license needs as a regular proces

“Check fir updates” checks the processor web server for any changes in the UI files and if so loads the new updated UI project. It’s worth leaving switched on unless you have a reason to otherwise Tim

Any chance you could post some example strings from Crestron? I'm having fun trying to make sense of the protocol manual.... Just need to switch between presets 1,2,3 SOunds like a need to send a Hear

Hi Danny, I'm not a certs expert, hopefully you have someone in house that can be more useful than I. It just came to mind as I have to update a load of PyngHubs with the DigiCertGlobalR2 certificate

Do you think it could be a security certificate issue on the TSW? As in not having the right certificates available on the device.

PyngHubs came with auth disabled by default, I found it easier to just connect to the processor in question using text console, Go to functions>security certificates and add the DigicertGlobalRootG2.c

Same for me yes

Make an offer. Location NZ Tim Greenbank Control Systems Engineer

I have an MC3 for sale if it’s going to get anyone out of a jam. Location NZ Tim Greenbank Control Systems Engineer

It’s been a while but I’m pretty sure there’s a “home page” serial which you can call the desired URL which won’t instantiate another tab Tim Greenbank Control Systems Engineer

The black out shades are the worst for this. Almost sounds like masking tape or walking on a sticky floor. I have suggested silicon spray but never had the balls to try it on the shade fabric! :P