#crestronconnected

Ethernet Control of Sharp EQ1 Series displays
The Sharp display has a default password of Panasonic?
Від Phil Bridges · #252991 ·
Ethernet Control of Sharp EQ1 Series displays
I'm not familiar with the display but have you tried connecting to it using the Crestron Connected Display XPanel? https://community.crestron.com/s/article/id-1000740
Від Ben Lizzotte · #252988 ·
Ethernet Control of Sharp EQ1 Series displays
Have not found any way to perform a hard factory reset for the Sharp EQ1 series displays. From all of my readings - I may be able to reset the password for the web browser by resetting the Network def
Від kteague@... · #252971 ·
Ethernet Control of Sharp EQ1 Series displays
A factory reset of the monitor to set its credentials to default? Then you will be able to access its web interface.
Від Antoine Dervin · #252969 ·
Ethernet Control of Sharp EQ1 Series displays
Issue is I can not access the Sharps web server to confirm any of the parameters? None of the ID/Passwords in the docs / Internet have not worked? Ken Teague AV Innovations Inc
Від kteague@... · #252967 ·
Ethernet Control of Sharp EQ1 Series displays
IPID is set correctly on the display for RoomView Connected control? With the IPID converted to decimal instead of hex?
Від josh@LiquidPixel · #252966 ·
Ethernet Control of Sharp EQ1 Series displays
Was called into a Library to fix a room system that was installed by others a few years ago. All of the 5 rooms have Sharp EQ1 series display (TH-65EQ1U) with 4 working fine. All were setup using Cres
Від kteague@... · #252959 ·
SOS! LG Screens not responding to crestron connected when off.
I successfully use these with Crestron Connected and a magic packet. I have a bunch of them and zero issues. if the TV is shutdown with CC, the power on is instantaneous, if the TV was shutdown by the
Від Olivier Royer · #248502 ·
SOS! LG Screens not responding to crestron connected when off.
I gave up using LG screens with IP for this very reason. From memory, the crestron connected module only turns off the lcd panel when the power off command is sent. It's more of a screen mute or a sof
Від Bambam_101 · #248493 ·
SOS! LG Screens not responding to crestron connected when off.
Think there's a setting for network standby that needs to be switched on before WoL will work. The "magic packet" works better if send, at least, 3 times. One of the screens we had would not work for
Від Neil · #248492 ·
SOS! LG Screens not responding to crestron connected when off.
It’s been a little while (and they were in a different hemisphere) since I’ve seen a LG display in a project so this is a little blind… When you say the NIC shuts down completely is it dropping link?
Від Lincoln King-Cliby · #248488 ·
SOS! LG Screens not responding to crestron connected when off.
Hi All I've been in and out of site for the last two weeks trying to resolve this issue. I have 8 LG Professional Displays (ur640s to be more precise) I literally just need to switch them on and off d
Від Tshiamo Mapodile · #248483 ·