Having issues trying to control this amp consistently over RS232. Using an iPad, Mute works almost every time, Raise works 80 %, and Lower never works. But if using Debugger, it does, but still not 10

Nope, set on Enable.

New system. Installed one roku last night, andthe 2nd one today.

Strange. The Roku we set up last night went to 14.1. The Roku we set up this morning went to 14.0.4. There was no navigation of hard buttons on the TSR-310 on 14.1, but we could navigate the scrolling

So on new project. Roku on 14.1 is enabled. But only works upon reboot of CP4 for at most 2 commands. Confirmed that IP address is correct, and Enable is chosen. Roku on 14.0 works fine. Going back to

Thanks, Worked fine, other than Chrome wouldn't let me connect, and had to use Firefox.

In the middle of a takeover with a Pro3. Was able to set up a IR-201 that already had 2.1 firmware that required a password. Was somehow able to still get it online and working with a Pro3 that isn't

Not sure. We only use Simpl on our projects

Get a Hubitat bridge. Works great!

I have been having this issue with D3 snd all projects for several months. Its to the point that I have a D3 laptop with older firmware that I need to carry with me, and another that has the latest DB

We ALWAYS spec Autonomics. We install Sonos when Client is stubborn, and will not listen about it's limitations.

Can't you use a TSW-770 or 1070? Sealoc can weatherproof those.

That would be a Heos command, as they use Heos for their streaming.

It's the same as the previous series of the SR AVR's.

If so, I would trust it as far as I can throw Steve Jobs ashes...

Looking forward to the dets.

I have just finished a project with this combo. The ir codes are learned from the remote, and the cable company is Armstrong in W PA. Will upload files in 5. There are no transport buttons, as you nee

Does it give full functionality that the Xfinity remote does?

I was not aware the Comcast Voice was working on Simpl yet. I think they're still in Beta for Home, with Simpl way down the road.

So since I have now added SSL, and still can't get it to work on my MC3, I went to add SSL to the older Android app. Guess what, now it will not save it as a configuration. Tried to just save it witho