NanoVNA-App is, for me, the best PC program I have found for my NanoVNA V2 (SAA2). I can view 3 plots or more at once. Most formats available in professional software are also available in NanoVNA-App

Hi Bill , at first you can look at the kiwi section of the groups. There are many informations and links on the subsection https://groups.io/g/nanovna-users/wiki#Documentation Of course Keysigth , Nat

with the version screen cap

Hi Doug Do NOT cut the wire just fold it back at the insulator and tape it in place. Cheers John G4FRD --- New Outlook Express and Windows Live Mail replacement - get it here: https://www.oeclassic.co

There are NanoVna V2s for higher frequencies.

could you explain how you are able to "export and save" ??? are you doing this on NanoVNA-f ? dan

No, you have it wrong. If you can't get an answer on Facebook (correct or otherwise) it doesn't exist. 73 The other Jim NU0C "W0LEV" <davearea51a@...> wrote:

You can also look at ZPlots, by Dan Maguire, AC6LA, which I personally find more user-friendly, and perform the same analysis. RigExpert’s AntScope 1, when used in consistent fashion, will provide sup

Hey Roger, Thank-you for your reply and the transformer info. I was aiming at what I can do with AntScope using the vna, either with nano-saver or on the device itself. 73Phil, WF3W

This thread is now locked due to the posts from members who complained about the validity of the off-topic portions of the thread. I apologize to those who have contributed useful information (on-topi

Morning Jim, From your mouth to... Thank-the-RF! 73Phil, WF3W

I just had the same problem a couple of days ago. A web search found a statement that at least some phones with USB-C connectors still need the OTG adapter. I went back to using an older phone with th

The NANOVNA can be used directly at 300-ohm resistance. Careful calibrationn and placement of the cursor is required to ultimately read values is required, but can be accomplished without introducing

Fixed! The project is working fine! syd/wt1v

I got tired of looking for connectors and took them all out and replaced them with my own out of the junk box.

I have a nanoVNA-F from DeepElec BH5NU ver 3.1 h/w that I updated to the 1.0.3 f/w. I also updated the nanovnaSaver win executable to ver 0.3.9 on Win7 & Win10. I updated to the latest on both sides f

I meant 'connect the nanovna to only the outer shield. Connect one vna cable conductor to each end of the coax shield. I think you cod measure the impedance this way. Also use the instructions in the

Suggestion for a pass/fail test jig of the bandpass width and ripple of crystal filters and other components.

I think these RF test boards help, trains you on results, if you have set the vnanano up and calibrated correctly, getting the prescribed results gives us ou some confidence in the nano.

Syd - please review the NanoVNA forum's WIKI - link at the bottom of every email. You will find alot of good info there. Also please use the search function of the messages section (search help doc is