All, Has anyone found a way to control a IV P20 cam via SIMPL? The device help shows TCP not UDP control for Visca support. Can standard Sony style Visca IP logic be used to control these devices? Loo

Please tell how you got this to work with the posted module? Thanks, Tray

I cannot get this to work either. The module 'EventSchduler 2 v1.2.0(cm)' has no MSP related to file path serial input so the S+ tries to open a path called '*'. I opened the CMC module and exposed th

How did you get RTSP video to show on a 7 series panel? I am trying to do that now. What settings for Enhanced Video object did you use? The help file only shows digitals, not analogs or serials for t

I notice that uploading programs vis 4 series web page (CP4 in this case) is very unreliable. It will work 1 time in 3. Most times, I just get a message that ' There was an error uploading file. Error

I am trying to stream video from a Crestron DM-TXRX-100-STR to a TSW-1070 panel. TXRX is running latest posted firmware. Cannot get this to work. The DM-TXRX-100-STR setup page 'stream status' always

Am stuck in a situation where Simpl Debug will not connect with a CP4. Either I get the 'waiting for device to initialize' or the 'cannot get any program information from the connected device....' mes

Found the issue within the Matrox supplied module. - T

This is what the Crestron module tries to send to port 80: GET /Monarch/syncconnect/sdk.aspx?command=GetStatus HTTP/1.1\x0D\x0AHOST:127.0.0.1\x0D\x0AAuthorization: Basic YWRtaW46UHJvZm91bmQxITEwME0=\x

Have several of these units that will no longer communicate with the Crestron modules supplied by Matrox (version 1). Can get into the device menus but did not find any options to specifically allow e

All, I cannot get CEC to work with any of the samsung displays here on site. They are mix of Signage and OFE consumer units. None of them work, always get '@E' as reply no matter what I send or what I

This does not work for CEN-GWEXER. Trying to find a solution

Can't get CEN-GWEX-ER to connect to MC3 control system. setup the user as described and it will not connect at all. Any ideas apart from rolling back the gateway firmware?

I mostly do commercial projects so this is a new one by me. Have a government project where the control system and touchpanels are in a secure room with no internet access. Want to use the TV preset v

This system was updated march of last year for this same issue. Seems that there is a newer firmware that fixes the issue. However, there is not a standalone firmware package to deploy to this unit to

Via remote support session, Crestron re-applied the room license to the server via Unix console. Support was good, Turns out the VC4 needs to connect to the internet/cloud in order to get firmware upd

All, Anyone have any ideas of how to make a VC4-PC3 stable so that it can find the offline dongle? First time this happened about a year ago, the VC4 firmware was out of date. After the upgrade and ot

Thanks for the help. Got it to work. Issue was the setup/init sequence. Once added, the cam control is good to default id of 81.

Aver Cam 570 Seems that the posted control module from App market does not work with the 570 camera. Anyone get this to work. I have tried several versions of module for control. Get no replies at all

All, Thanks for your input and patience. Just spoke with Crestron and so far there is not a way to make this work. Turns out I got bad info, the end user preferred standalone Xpanel project anyway so