1. Crestron
  2. Теми

IV-CAM-P20 control from SIMPL?

 

All, 
 
Has anyone found a way to control a IV P20 cam via SIMPL? 
The device help shows TCP not UDP control for Visca support. Can standard Sony style Visca IP logic be used to control these devices? 
 
Looking into a Crestron Device Driver for this but the camera control wrapper has no inputs for file path/name nor does it have an input to load the driver file. 
 
Thanks in advance, 
 
Tray
 

Modules are available under the Intelligent Video category in SIMPL Windows


On Thu, Dec 19, 2024 at 7:53 AM Tray Schaeffer via groups.io <trayschaeffer=gmail.com@groups.io> wrote:
All, 
 
Has anyone found a way to control a IV P20 cam via SIMPL? 
The device help shows TCP not UDP control for Visca support. Can standard Sony style Visca IP logic be used to control these devices? 
 
Looking into a Crestron Device Driver for this but the camera control wrapper has no inputs for file path/name nor does it have an input to load the driver file. 
 
Thanks in advance, 
 
Tray
 

The camera module works for all 1Beyond cameras


On Thu, Dec 19, 2024 at 9:23 AM Tray Schaeffer via groups.io <trayschaeffer=gmail.com@groups.io> wrote:
I found the modules for the Automate VX and the cam auto tracker but no module for cam control. 
Are there more Cres DB modules I missed? 
 
Tray
 

I was testing a system today with four Crestron 1 Beyond IV-CAM-I12-B cameras, and CP4n using the 1Beyond AutoTracker_IV-CAMA3 module.  It appears to control the cameras but I did notice an error log entry in the processor about an exception at Line 522 in the SIMPL+ module.  Sorry I didn't have time to research it further. . . 
--
Doug G
 

I used VISCA commands to TCP port 5500 for the IV-CAM-I20s we just installed.  Most of the commands are the same as any other PTZ dating back to Sony EVIs and probably before.  Never did find the Crestron module.


On Fri, Dec 20, 2024 at 4:38 PM Doug G via groups.io <dguth=solutionzinc.com@groups.io> wrote:
I was testing a system today with four Crestron 1 Beyond IV-CAM-I12-B cameras, and CP4n using the 1Beyond AutoTracker_IV-CAMA3 module.  It appears to control the cameras but I did notice an error log entry in the processor about an exception at Line 522 in the SIMPL+ module.  Sorry I didn't have time to research it further. . . 
--
Doug G

1 - 5 з 5