I'm guessing you are connecting to the Marantz and staying connected. For some reason if you are connected to the Marantz when Crestron reboots, Crestron can not reestablish the connection until the s

I Have a Clipsal Dali Gateway for lighting control I need any method to integrate with Crestron Any Module except that found at the App Market

I’m also struggling with this on a CP4N and it’s crashing the router

I've been playing with the bigger brother to this unit - the KY-PZ510 using an old AV2 I have used this manual: http://pro.jvc.com/pro/attributes/ptz/manual/Standard_Command_List.pdf to control it. Ba

TSR-310 v2.001.0174 (10/10/23) has some major improvements regarding WiFi & "Connecting to System" behavior in CH. Please update your remotes and refer to release notes for more information. https://w

https://github.com/MatKlucznyk/Qsys been using this for years and it’s been rock solid. From what I was told version 2,3,4 (not sure on 5) of the Q-SYS modules were all written by different people at

Hi All, I'm successfully using some Q-SYS module from Mathew Klucznyk and they are faster and easier to implement than the QSC certified module from Crestron. In many cases, no need to create a "named

Nathan, That did it! Thank you for posting the repo. I was able to pick out the (embarrassingly minor) bits of code I needed, and got my server using a cert signed by a local network CA.

Hi Everyone, Have anyone worked with Jupiter video wall J600 with Crestron CP3 or CP4? I am stuck in finding the right module, as the one on the Crestron application market is very old.

Yes, that is an important article. When troubleshooting it's often helpful to start at the device's Answer Index. https://support.crestron.com/app/answers/detail/a_id/1001202 Please remember that OLH

First off, I would recommend using a VPN instead of port forwarding to access your Crestron system remotely. Unfortunately the UDM Pro won't do OpenVPN. But if you do want to do port forward anyway, a

We can only wish that would be possible :o)

Hi, I have a CP4R processor but need a non-home processor. Is it possible to reconfigure/reflash the CP4R I have to be a standard CP4?

You can do a page flip on the "X series" (in both teams and zoom mode) that supports a single VTP custom page of which you can add a buttons or some room controls. It's not quite as intuitive from GUI

Exceptions from async void methods are not discarded, they still get thrown; albeit with different error-handling semantics since there is no Task/Task<T> object to place the exception on. That does b

Yes. Creston did say that due to the different chipset and OS in the Series 4 processors, VS2008 won't connect for debugging (single stepping through a program).

I’ve used the older vsx modules and added in a few manual commands in the past for extra inputs, as far as I know the protocol has been consistent for about a decade

Since you are referring to LAG,it sounds like you are having an issue with insufficient bandwidth on your trunk line and you have having to use multiple fiber links to get the uplink bandwidth up to h

I assume that your 'forced' authentication connection is getting timed out - very annoying! (like most things lately!) to mitigate, I was given the following console command to use (also works with 3-